Training Session - TensCare perfect PFE Bedienungsanleitung

decrease the effectiveness of the
perfect PFE's muscle stimulation.
3) Choose a comfortable position, such
as lying down on your bed on your
side with your knees raised.
Warning: Ensure the perfect
PFE is switched OFF before
inserting the probe.
4) After the wire is securely connected,
insert the probe into your anus,
whilst 'bearing down' (as in the
action of passing
comfortable limit until the base of the
flange on the probe touches the
anus.
5) The metal parts
electrical pulse and should be in
contact with the main part of the
muscle at all times. The tissues close
to the entrance are more sensitive,
so you should avoid stimulating
them.
6) It is recommended that the probe is
inserted past the sphincter muscles
of the anus,
otherwise by
professional.
Note: Anal probes with long
electrodes (the metal part) that
run up and down the length of
the attachment should
inserted with the metal parts facing hip-
stool) to a
conduct the
unless directed
a healthcare
always be
24
to-hip. Anal probes
electrodes (the metal part) should be
inserted simply to the desired depth.
Note: Sometimes the wearing
of tight fitting undergarments or
a tight pair of jeans will help to
keep the probe in place and maintain
correct contact during the programme.
For Faecal incontinence, the aim is to
stimulate the external sphincter and/or
pubo-rectal muscle,
electrodes should be placed so that the
external ring is just inside the sphincter.
For Urinary Stress incontinence and
Erectile Dysfunction, the aim is to
stimulate the levator muscles and the
probe should be inserted deeper.

13.4. TRAINING SESSION

1) Press and hold the ON button on the
control unit for 3 to 5 seconds to
switch the control unit on.
2) You can select from the five preset
programmes. Details in section 10
will help you identify the best
programme to suit you.
To change
programmes, press the programme
selector, which is labelled P, in the
centre of the control unit keypad.
3) With the required
selected, you can adjust the intensity
of the muscle stimulation until you
reach a comfortable level. Once you
have reached a comfortable level, 5
seconds after you stop pressing the
button, the intermittent work/rest
phase will start. The machine will
take itself to 0 mA for a rest period
and then take itself back up to the
level of intensity you chose, to work
with circular
so circular
between the
programme