Training Session - TensCare Sure+ Bedienungsanleitung

Ensure that the probe is aligned so
that the contact plates are to the
sides and the longer sides of the
positioning end rim are vertical.
Contact plate
6) The Liberty Loop probe has a pointer
attachment which enables you to
visually monitor the successfulness
of your pelvic floor contractions (the
probe can be used without the
pointer).
The pointer demonstrates
strength and duration
contraction, whether caused by
stimulation or performed manually.
For example, weak contractions are
defined by little or no movement in
the pointer.
Assemble the pointer and attach to
the probe as follows:
• When
performed
correctly, the pointer
will move downwards.
• When
performed
incorrectly, the pointer
will move upwards.

14.4. TRAINING SESSION

1) Press and hold the ON button on the
control unit for 3 to 5 seconds to
switch the control unit on.
2) You can select from the five preset
programmes. Details in section 10
will help you identify the best
programme to suit you.
To
programmes, press the programme
selector, which is labelled P, in the
Positioning
centre of the control unit keypad.
end rim
3) With
selected, you can adjust the intensity
of the muscle stimulation until you
reach a comfortable level. Once you
have reached a comfortable level, 5
seconds after you stop pressing the
button, the intermittent work/rest
phase will start. The machine will
take itself to 0 mA for a rest period
and then take itself back up to the
level of intensity you chose, to work
the
the muscle. This cycle will continue
of each
for the 20 minutes of the programme.
power – 99 mA. The Sure+ strength will
go up at 1 mA increments.
Initially the sensation through the probe
may be limited but will improve during
treatment. Take care not to use too
much
stimulate the muscles until normal
sensation is restored. The sensation
may not be even as it may vary
depending on the sensitivity of the
nerves.
The LCD display shows the strength of
intensity used. The aim is to increase
this over a few days. But remember
there is no hurry, so only increase the
strength of the stimulation as and when
you are comfortable and ready to
progress.
24
change between
the required programme
Note: The strength required
varies widely between users -
some will use the Sure+ at full
strength and thereby
the
over