Setting Up And Using The Perfect Pfe; Installation Of Batteries - TensCare perfect PFE Bedienungsanleitung

3) Memory Reset. To reset memory to
zero, hold down the T and OFF buttons
together for 3 to 5 seconds.
13. SETTING
USING THE PERFECT
PFE
13.1. INSTALLATION
BATTERIES
1) Remove belt clip by sliding down.
2) Remove battery cover by pulling on
tag.
3) Insert batteries.
Number of
uses
Time used
in hours
UP AND
OF
22
Ensure that the batteries are inserted
the right way as shown in battery
compartment and that the ribbon is
behind them.
4) Replace battery cover and belt clip.
When the
running low, a low battery
indicator will show on the
screen and it is important to change the
batteries as soon as possible.
Rechargeable batteries
The unit will work with rechargeable
batteries, but the display may appear
dim.
Caution: Remove batteries
from your perfect PFE if the
unit is unlikely to be used for a
long period. Some types of batteries
may leak corrosive fluid.
Caution: The operator should
not touch the patient at the
same time when touching the
battery output.
Battery Life
Batteries should last at least 15 hours
at 50 mA, 300 μs, 50 Hz.
Unused batteries have a nominal shelf
life of 1 year, but will usually last longer
than this.
Battery Warnings
Do NOT pierce, open, disassemble, or
use in a humid and/or corrosive
environment.
Do NOT expose to temperatures over
60°C(140F).
batteries are