Connecting Lead Wires; Preparing For Session; Training Session - TensCare Perfect EMS Bedienungsanleitung

Keep batteries out of the reach of small
children.
Caution NEVER attempt to
recharge an alkaline battery.
Risk of explosion.
Caution Do not mix old, new or
different types of batteries as
this may lead to battery leakage or low
battery indication.
Disposal: Always dispose of batteries
responsibly according
government guidelines. Do not throw
batteries onto a fire. Risk of explosion.
12.2. CONNECTING LEAD
WIRES
Insert the lead wire plug into the base of
the unit.
Attaching the electrode pads to the
lead wire.
Push the pin ends firmly into the pigtail
ends of the electrode pads.
The lead wires may be damaged by
rough handling, and should be treated
with care.
Lead wire colour coding.
The ends of the lead wires are coloured
red or black. One of the electrode pads
should be positioned over the motor
point (see 9.3.).
12.3. PREPARING FOR
1) Before use make sure your skin is
clean and dry.
2) Place the electrode pads on the skin,
see section 9.
to local
3) If you are using your perfect EMS
while moving, you can attach the unit
to your belt using the belt clip or hang
it around your neck using a neck cord
(not included). For safety, use thread
or wool that will snap easily if the unit
snags on something.
4) You can safely lean on the electrode
pads. The sensation might change.
applying the electrode pads on the skin.

12.4. TRAINING SESSION

1) Press and hold the ON button on the
control unit for 3 to 5 seconds to
switch the control unit on.
2) When switched on for the first time,
the perfect EMS will automatically
select the programme A. Next time,
it
programme you were using the last
time it was switched off.
3) You
programmes (6 preset and 4 manual
programmes). Details in section 8
will help you identify the best
programme to suit you.
25
SESSION
Warning: Ensure the perfect
EMS is switched OFF before
will automatically
can select from
select the
the 10