Belden Lumberg Automation LioN-X IO-Link Master Handbuch Seite 108

12.2 Herstellerspezifische
Objektklassen
Attribute Name
3 Input Data
Extension
4 Output Data
Swapping Mode
5 Output Data
Swapping Offset
6 Input Data
Swapping Mode
7 Input Data
Swapping Offset
8 IOL Failsafe
9 Port Mode
108
Access Data type
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
12 CIP-Objektklassen
Description
0: No Data
1: Extended Status
2: Events
3: Extended Status + Events
Only settable when no connection is
established.
0: Raw IO-Link Data
1..16: 1..16 WORD
17..24: 1..8 DWORD
Only settable when no connection is
established.
0..30 Byte
Only settable when no connection is
established.
0: Raw IO-Link Data
1..16: 1..16 WORD
17..24: 1..8 DWORD
Only settable when no connection is
established.
0..30 Byte
Only settable when no connection is
established.
0: Set Low
1: Set High
2: Hold Last
3: Replacement Value (transferred via
IO-Link Failsafe Parameter Object)
4: IO-Link Master Command
0: Deactivated
1: Manual (with validation and backup
config)
2: Autostart (no validation and backup
config)
Handbuch EtherNet/IP
Version 1.2 05/2021