Belden Lumberg Automation LioN-X IO-Link Master Handbuch Seite 105

12 CIP-Objektklassen
Instance attribute (Instance 1..16)
Attribute Name
1 IO Mapping
2 DO Surveillance
Timeout
3 DO Failsafe
4 DO Restart Mode
5 DI Logic
6 DI Filter
7..9 Reserved
10 Channel Mode
Handbuch EtherNet/IP
Version 1.2 05/2021
Access Data type
Get, Set SINT
Get, Set INT
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
Get, Set SINT
12.2 Herstellerspezifische
Objektklassen
Description
0..15: Bit number of 16 channel
process data
16: Inactive
0..255
0: Set Low
1: Set High
2: Hold Last
0: Disable
1: Enable
0: Normally Open
1: Normally Close
0: Disabled
1: 1 ms
2: 2 ms
3: 3 ms
4: 6 ms
5: 10 ms
6: 15 ms
0: Inactive
1: Digital Output
2: DigitalInput
3: IO-Link (if available)
105