Signal Strength - Simons Voss Technologies Routernode 2 Kurzanleitung

RouterNode 2, GatewayNode 2,
All manuals and user guides at all-guides.com
SmartBridge
SmartIntego:
Gate-
wayNode 2

6.1 Signal strength

Measure sig-
nal strength
EN
You can manage network-compatible locks in
SmartIntego wirelessly with GatewayNode 2. Please
refer to the SmartIntego technical manual for details.
Signal strength, as with all radio devices, depends on
several factors, including:
Centres distance

Structural conditions (e.g. metal surfaces or

reinforced concrete as building material)
Other transmitters in the 868 MHz range (e.g.

wireless microphones or garage door openers)
If you are not satisfied with the operational safety, you
can change the installation location or use an external
antenna (see manual).
You can measure the signal strength of the device with
a measuring device (BAMO tester). If you would like to
use a BAMO tester, you can obtain it from SimonsVoss
Technologies GmbH with the article number
WN.TESTER.BAMO.EU/WN.TESTER.BAMO.US or
SI.GN.TESTER.BAMO.EU. The exact procedure is
described in the manual of the BAMO tester.
6. Initial operation
43 / 184