Herunterladen Inhalt Inhalt Diese Seite drucken

Additional Safety Warnings - Scheppach CID27-12Li Original Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für CID27-12Li:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
b. Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous and
must be repaired.
c. Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing pow-
er tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous in
the hands of untrained users.
e. Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation. If
damaged, have the power tool repaired before
use. Many accidents are caused by poorly main-
tained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
h. Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpect-
ed situations.
5) Service
a. Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is maintained.

6. Additional Safety Warnings

Safety advice relating to cordless drill drivers
• Hold the device by the insulated handle surfaces
when you are undertaking work where there is
the danger of the screw striking hidden electricity
cables or the device's mains lead. Contact of the
screw with a live wire could cause metal parts of the
device to become live and lead to electric shock.
• Children or persons who lack the knowledge or expe-
rience to use the device or whose physical, sensory
or intellectual capacities are limited must never be
allowed to use the device without supervision or in-
struction by a person responsible for their safety. Chil-
dren must never be allowed to play with the device.
20 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
• Securely support the workpiece. A workpiece held
in a clamp or vice is kept more securely in place
than one held by your hand.
POISONOUS DUSTS!
Harmful / noxious dusts generated from your work rep-
resent a risk to the health of the person operating the
device and to anyone near the work area. Wear safe-
ty glasses and a dust mask! Do not drill any material
containing asbestos. Asbestos is a known carcinogen.
Hold the electrical power tool firmly. High reaction
torques may occur momentarily during tightening or
loosening of screws.
If the inserted tool jams, switch off the electrical pow-
er tool immediately. Be prepared for high reaction tor-
ques as they may cause kickback. The inserted tool
may jam if the electrical power tool is overloaded or is
held at an angle to the workpiece.
Before you carry out any tasks on the device, trans-
port or store it, make sure that the direction of rotation
switch is in the middle position (lock). To prevent the
device from starting up unintentionally.
Attention - Service lines!
Danger! Take steps to ensure that you do not hit
upon any service lines (electricity, gas, water) when
working with electrical appliances. Check, if need be
with a service line detector, before you start to cut or
bore into a surface.
Safety notices for Li-Ion batteries
• Do not open the battery. Risk of short-circuiting!
• Protect the battery from heat, e.g. from con-
stant sun exposure, and from fire, water and
humidity. Risk of explosion.
• When the battery has been damaged or it is
being used inappropriately, fumes can be re-
leased. Let fresh air in and consult a doctor if the
fumes cause you any problems. The fumes can
irritate the respiratory tract.
• If used incorrectly, liquid may leak from the
battery. Avoid contact with this. In the event of
accidental contact, rinse off with water. If the
liquid gets into eyes, seek medical assistance.
Leaking battery fluid may cause skin irritations or
burns
• Only use original batteries with the voltage
specified on the rating plate of your power
tool. If other batteries are used, e.g. imitations,
reconditioned batteries or products from third party
manufacturers, there is a risk of personal injury
as well as property damage based on exploding
batteries.
• The battery voltage must correspond with the
battery charging voltage of the charger. Oth-
erwise, there is a risk of fire and explosion.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

5909201900

Inhaltsverzeichnis