Replacing The Spark Plug - Toro SnowMax 724 QXE Bedienungsanleitung

Figure 23

Replacing the Spark Plug

Service Interval: Every 100 hours—Replace the
WARNING
Replacing the spark plug while the engine is
hot can result in burns.
g030112
Wait until the engine is cool to replace the
spark plug.
Use a Toro spark plug or equivalent (Champion®
RN9YC or NGK BPR6ES).
1. Remove the boot
1. Spark-plug boot
2. Clean around the base of the spark plug.
3. Remove and discard the old spark plug.
Note:
You will need a ratchet wrench extension
to remove the spark plug.
4. Set the gap between the electrodes on a new
spark plug at 0.76 mm (0.030 inch) as shown
in Figure
1. 0.76 mm (0.030 inch)
g214777
16
spark plug.
(Figure 24).
Figure 24
25.
Figure 25
g030123
g001029