Features Of The Tlw3 Wireless Remote Control; Power On/Off; Setting The Temperature - AERMEC FCWI-Serie Bedienungs- Und Installationsanleitung

FEATURES OF THE TLW3 WIRELESS REMOTE CONTROL

The following features can be operated by the buttons on the remote control unit.

POWER ON/OFF

Press the POWER key to switch the air conditioner on or off. When turned on, the system will operate according to the setting shown on the
remote unit.
MODE
By pressing the MODE key, the air conditioner can be set in:
• 5 operating modes (fan, cool, dry, heat, auto)
The LCD on Remote shows FAN, COOL, DRY, HEAT or AUTO according to the selected mode. The system will work as the set mode after no mode
is changed for 3 seconds.
FAN
Press FAN button to select the fan speed (auto, low, medium or high speed). The display on the Remote unit will show the status. While auto
speed is set, the fan speed (high, medium, low) will be changed automatically according to the system calculation. The indoor fan will work
according to the set speed after no fan speed is changed for 2 seconds.
Note:
1. FAN button cannot be used in DRY mode.
2. The Auto Fan will be disabled in Fan mode (can be set but main unit will not response).
3. The indoor fan may not work as setting if some functions or protections are occurring.

SETTING THE TEMPERATURE

The temperature can be set within a range of 18-30°C.
Press or to increase or decrease the setting in steps of 1°C. The LCD on the remote unit will show the setting temperature.
The temperature setting function is disabled in FAN mode.
TLW3
POWER ON
POWER OFF POWER OFF
POWER OFF POWER OFF COOL COOL
POWER ON
COLD COLD
POWER ON POWER ON
HEAT HEAT
33