Concept VP4290 Bedienungsanleitung Seite 29

EN
OPERATING INSTRUCTIONS - VACUUM CLEANER ASSEMBLY
NOTE:
Prior to mounting or removing accessories, always turn the appliance off and disconnect the charging adaptor (E) plug
from the mains outlet!
1. Charging base positioning
You can mount the charging base (A) on the wall, or use it free-standing.
The spacing of the wall fixing holes is 64 mm (Fig. 1).
ACCESSORIES
1. Slot nozzle (B)
The slot nozzle adaptor is used for vacuum cleaning the places accessible with
difficulty, such as radiators, slots, corners, pedestals, spaces between upholsteries,
and others.
2. Nozzle with a brush (C)
This nozzle is designed for furniture, upholstery, books, lamps, and others.
3. Electric turbo-brush (D)
This accessory boosts the suction power, combs dirt out of carpets, and makes suction
more efficient.
ACCUMULATOR CHARGING
Prior to the first use, or after the appliance's accumulator is fully discharged, let the
appliance charge for about 16 hours.
To charge the accumulator, place the switched off appliance in the charging base (A),
and connect the charging adaptor (E) to the wall outlet. The charging indicator light (4)
goes on (Fig. 2).
The charging indicator light (4) colour indicates the accumulator charge level.
Red colour - The accumulator is being charged.
Green colour - The accumulator is fully charged.
The charging indicator light (4) just communicates the information on the accumulator
charge level; it does not terminate the charging process.
Note: To keep the longest possible service life of the accumulator, always charge it
when fully discharged, and, when fully charged (the charging indicator light is green),
disconnect the charging adaptor (E) from the mains.
The service life is about 300 charging cycles.
The operation time of the appliance after the accumulator is fully charged is about 10
minutes.
APPLIANCE USE
Note: Prior to using the vacuum cleaner, please make sure that the filter has been
installed and fixed properly.
VP4290
Fig. 1
Fig. 2
Fig. 3
27