How To Replace The Thread Lifters; Cleaning The Roller On Floorhead Sbd 285-3; Maintenance - Miele S 5211 Gebrauchsanweisung

How to replace the thread lifters

(dia. 42 + 43)
^ Use a suitable screwdriver to remove
the thread lifters from the slots.
^ Fit new thread lifters.
Upholstery nozzle SPD 10 (dia. 44)
^ Disengage the thread lifter unit at
each side of the upholstery nozzle
using a coin.
^ Fit a new thread lifter unit and lock
into position.
Cleaning the roller on floorhead
SBD 285-3 (dia. 45)
a Release the bearing (with bayonet
fitting) using a coin.
b Press the bearing out, and remove it.
c Take out the roller.
^ Remove any threads and hair,
replace the roller and refit the
bearing.
Replacement parts are available from
your Miele retailer or from Miele (see
back cover for contact details).

Maintenance

Warning: Always disconnect the
vacuum cleaner from the electrical
supply before cleaning it. Switch off
at the wall socket and unplug it.
Vacuum cleaner and accessories
External surfaces of the vacuum
cleaner and of the accessories can be
cleaned with a dry or a slightly damp
cloth, or with a proprietary cleaner
suitable for plastic.
Warning: Do not use abrasive
cleaning agents, glass cleaning
agents, all-purpose cleaners or
oil-based conditioning agents.
Dust compartment
The dust compartment can, if
necessary, be cleaned using a dry
duster, brush or, if available, a second
vacuum cleaner to vacuum the dust
out.
Warning: Do not let the vacuum
cleaner get wet. If moisture gets into
the appliance, there is a risk of
electric shock.
en
45