About The Dvd-Player - Clatronic AR 737 Bedienungsanleitung

22. LOC button
LOCAL/DX (EON) (only available during radio operation)
Your radio can receive RDS EON data. The term „EON"
signifi es the transmission of additional station information
within a station chain, e.g. WDR. If a traffi c announcement
(TA) is made within a station chain, the radio switches from
a station which does not transmit traffi c announcements to
one that does within the same station chain.
Reception of this station data is shown in the display by the
EON symbol. You can choose between the LOC(AL) and DX
(DISTANCE) mode for local or long-distance traffi c news.
LOC(AL):
This function prevents switching to an EON station whose
signal is too weak. The radio does not switch to this station
and the listener does not hear any interference.
DX (DISTANCE) Mode:
In this mode the EONTA circuitry tries to receive the EONTA
information from any available transmitter and thus improve
reception quality.
23. MENU button
For selecting the DVD main menu in DVD mode.
24. CLK Button (Time)
a) Move the SEL button (3) in the direction of CLK in order
to bring up or hide the clock.
b) In order to set the time, keep the SEL button pressed in
the direction of CLK for approximately 3 seconds. The
hours fl ash in the display. Carry out the settings with the
help of the VOL multifunction button (2). Then move the
SEL button (3) in the direction of CLK. The minutes now
fl ash. Carry out the settings with the help of the VOL
multifunction button (2). Before storing the time move
the SEL button (3) in the direction of CLK again.
NOTE:
If RDS data is received the time is set automatically.
25. USB Connexion
This device has been developed in accordance with the
latest technical developments in the USB fi eld. Unfortunately
the large number of different types of USB storage media on
offer today makes it impossible to guarantee full compatibili-
ty with all USB storage media. For this reason there may be
problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
If you would like to play back data contained on a USB stick,
please insert the stick into the opening provided. You can
use the supplied adapter cable for this. To play back the
data on the stick, select the USB stick with the help of the
MOD button. The data is played back automatically.
NOTE:
If you have problems with operation using the USB
connexion, please use an appropriate adapter cable and
proceed as described under AUX IN.
05-AR 737 DVD_GB 27
26. AUX IN socket
To connect analogue replay devices. Use this jack to replay
sound of other replay equipment such as DVD players,
computers, etc. via the loudspeakers.
1. Please connect the external device with a 3.5 mm
stereo jack plug to the AUX IN socket.
2. Press the MOD button (9) to select the AUX IN connec-
tion.
3. You now hear the sound from the external device played
back through the loudspeakers.
4. With the VOL multifunction button (2) you can change
the volume.
5. For the remaining procedure please see the operating
instructions of the external sound source.
27. IR (Infrared)
Sensor for the remote control
28. RESET Button
Due to voltage fl uctuations in your vehicle electrical system
it is possible that the control processor of your radio has
„hung up". This is not a fault in the device! Press this
button with a pointed object to restart it (reset).

About the DVD-Player

With this DVD-Player you can play a vast variety of DVD-formats
➯ „Technical data".
However, you must be aware that in many cases DVDs are
encrypted with a so-called "Regional Code". This specifi es for
which region in the world the DVD is intended. As an example,
the DVDs marked with regional code "1" are intended for the USA
and Canada. DVDs with regional code "2" are for use in Europe.
NOTE:
With your DVD-Player you can only play DVDs with regional
code "2". There are both lots of burning and compressing
methods as well as high quality differences in (burned) CDs/
DVDs. Moreover, the music industry has not yet agreed on a
fi xed standard for copy protection. This may, in very isolated
cases, result in problems when relaying CDs, DVDs and MP3
CDs. This is no malfunction of the player.
Furthermore, there may be isolated problems when playing CDs
or DVDs which were created on a PC (e.g. holiday photo-
graphs). In case of problems check the settings of the DVD
writing program on your computer. You should in particular make
sure that the DVD has been fi nalized. For further information on
this matter please refer to the operating manual of your recorder.
Input Not Possible
If a function or input selected by you is not
possible, the adjacent symbol is shown on the
screen.
27
21.08.2006, 11:50:05 Uhr