Using Standby Reception - JVC KD-S733R Bedienungsanleitung

The same programme can be received on
different frequencies.
Programme 1
broadcasting
on frequency A
Programme 1
broadcasting
on frequency B
Programme 1
broadcasting
on frequency C

Using Standby Reception

Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) and Traffic Announcement (TA)
from the current source (another FM station or CD).
• Standby Reception will not work if you are listening
to an AM station.
TA Standby Reception
When you press TP RDS while listening
RDS
to an FM station, the TP indicator is lit
TP
during reception of a TP (Traffic
Programme) station and the TA standby
mode is engaged.
• When the station being received is not a TP station,
the TP indicator flashes. Press ¢
engage the TA standby mode. "SEARCH" appears on
the display, and TP station search starts. When a TP
station is tuned in, the TP indicator is lit.
7 If you are listening to a CD and wish to listen to a
TP station, press TP RDS to enter the TA standby
mode. (The TP indicator lights up.)
If a traffic programme starts broadcasting while the
TA standby mode is active, "TRAFFIC" appears and
the playback source changes to the FM band. The
volume increases to the preset TA volume level (see
page 14) and the traffic programme can be heard.
To deactivate the TA standby mode, press TP
RDS again.
PTY Standby Reception
PTY
Programme 1
broadcasting
on frequency E
• When the station being received is not a PTY station,
the PTY indicator flashes. Press ¢
to engage the PTY standby mode. "SEARCH" appears
on the display, and PTY station search starts. When a
PTY station is tuned in, the PTY indicator is lit.
Programme 1
7 If you are listening to a CD and wish to listen to a
broadcasting
selected PTY broadcast, press PTY to enter the
on frequency D
PTY standby mode. (The PTY indicator lights up.)
If the selected PTY programme starts broadcasting
while the PTY standby mode is active, the selected
PTY name appears and the playback source
changes to the FM band. The selected PTY
programme can then be heard.
To deactivate the PTY standby mode, press PTY
again.
or 4
to
When you press PTY while listening
to an FM station, the PTY indicator is
lit during reception of a PTY station
and the PTY standby mode is
engaged. The selected PTY name
stored on page 12 flashes for 5
seconds.
or 4
11