Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Tips; Installation; Placing Your Child In The Thunder Car Seat - be cool Thunder Anleitung

Vorschau ausblenden Andere Handbücher für Thunder:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
the car seat. Although it may seem strange, in case
of an accident, even at only 40 km/hr the force is
such that it would be completely impossible to hold
onto your baby.
• Remember not to use the THUNDER car seat in
cars with front seat air bags, unless they can be
disconnected, it is recommended that you should
consult with the manufacturers or the sales agent
of your car.

INSTALLATION TIPS

Installing the car seat with a 3-point safety belt
The THUNDER can only be used with an automatic 3-point safety
belt. (Fig. 1)
The THUNDER must be fitted as a forward-facing position in the
rear seats of the car by
using the existing seat belts.
However, for some seats, if the installation is not properly fitted,
we suggest to try another seat in your car.
Four positions of the car seat.
The THUNDER can be used in four different positions. (Fig. 2):
Pull the positioning handle under the front of the seat forwards or
IM 1422.03 THUNDER INST.indd 21
backwards (feel the spring underneath), then release the handle
on your required position while hearing a distinct click.

INSTALLATION

Installing method for Group I (9-18 kg)
a) Place the THUNDER in the sleeping position 3 or 4. (Fig. 3)
b) Remove the long shaft by pulling the peg which is attached on the
side of the shell. (Fig. 4-A)
c) Pull and hold the shell forward, then thread the seat belt between
the shell and the base, fastening the seat belt with the seat
buckle, while ensure the belt is not twisted. (Fig. 5)
*Make sure the shoulder belt go from top of the backrest and the
lap belt go horizontally over the lap belt indicator (Fig. 5-A), joint the
shoulder belt and buckle up the seat on the other side (Fig. 5-B). So
the installation is completed (Fig. 5-C).
d) Return the shell to its original position, and thread the installation
shaft into the hole and lock the peg with shaft until hearing a
distinct click. (Fig. 4-B)
e) Adjust the shell to your child's most comfortable position.

PLACING YOUR CHILD IN THE THUNDER CAR SEAT

Loosen the shoulder belts by pressing the realease button and
pull the shoulder belts towards you.
EN
21
20/6/18 8:52

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

754 657

Inhaltsverzeichnis