Checklist; Guarantee Information - be cool Thunder Anleitung

EN
h) Close the buckle and thread the belts through the belt pads,
cover and shell.
i) Connect the shoulder belts to the belt yoke.
j) Fasten the cover all around, behind the pins.

CHECKLIST

For safety's sake read through this checklist before you set off.
Check that the harness belt system fits properly and tightly
around your child and that the shoulder belts are at the correct
height.
Check regularly that the belt in the baby car seat is not damaged.
If it is damaged do not use your product in any circumstances and
contact your supplier or importer (see address list in the service
card).
Check that you have secured your baby car seat with the seat belt.
If you have any questions, please contact your supplier
Make sure that you have the following details to hand:
- Serial number underneath on the service card.
- Mark and type of vehicle and seat on which the baby car seat
used.
- Age and weight of your child.
24
IM 1422.03 THUNDER INST.indd 24

GUARANTEE INFORMATION

This article is guaranteed in accordance with R.D. 1/2007 of 16th
November. Keep your receipt as proof of purchase, you need to
show it at the store where you purchased the product to prove validity
in the event of any type of claim. This guarantee does
not cover any faults or breakages caused by misuse of the article or by
not following the safety and maintenance information
listed in the instructions and on the care labels.
20/6/18 8:52