malossi MULTIVAR 51 7075 Bedienungsanleitung Seite 17

ATTENTION:
IF YOUR VARIATOR FEATURES A SINTERED
SLIDING BUSH, YOU MUST NECESSARILY
AVOID THE BUSH COMING INTO CONTACT
WITH DEGREASERS.
DO NOT LUBRICATE AND DO NOT CLEAN
SINTERED BUSHES WITH DEGREASERS AND/
OR DILUENTS.
IN CASE OF VARIATORS REQUIRING
LUBRICATION USE EXCLUSIVELY MALOSSI 7.1
MRG GREASE OR MALOSSI 7.1 MHR GREASE
FOR RACING USE.
Technical specifications and size
limits
INNER Ø SINTERED BUSHES
NOMINAL SIZE MAX SIZE ADMITTED
20
22
27
INNER Ø STEEL BUSHES
NOMINAL SIZE MAX SIZE ADMITTED
31
35
38
40
OUTER Ø VARIATOR HUBS
NOMINAL SIZE MAX SIZE ADMITTED
20
22
27
31
35
38
40
17
We hope you found the above instructions
suff iciently clear. However, if any points are not
particularly clear, please contact us completing
the special form inserted in the "contact" section
on our Internet site (malossistore.com). We
thank you in advance for any comments and
suggestions you may wish to send us. So goodbye
from us all at Malossi, and please accept our
compliments. Have Fun. GOOD LUCK and ... see
you next time.
20,10
22,10
The descriptions in this publication are not
27,12
binding. Malossi reserves the right to make
modifications, if it considers them necessary,
and does not accept any responsibility for any
typographic or printing errors. This publication
31,08
replaces all previous publications referring to the
35,08
updating matters contained therein.
38,10
Warranty
40,10
Look up warranty terms in our website
malossistore.com.
These products are reserved solely for races
19,96
in locations reserved for those purposes and
21,95
in accordance with the regulations issued by
26,94
the competent authorities for sports events.
30.94
We decline any and all responsibility for
34,94
improper use.
37,94
39,94