First Steps - Omnitronic COMBO-500 Bedienungsanleitung

4

FIRST STEPS

When the PA system leaves the factory, the mixer and the accessories are installed in the speakers.
1
To remove the mixer turn the screw from the LOCK to OPEN position until it clicks (e.g. with a coin or
screwdriver). Make sure the PA system is turned off beforehand.
2
Securely hold the mixer's handles and remove it from the speaker's enclosure.
Use only the mixer's handles when removing the mixer from the speaker and when carrying the
mixer separate from then speaker.
The mixer can also be used when installed in the speaker.
3
The other speaker features a convenient storage compartment for the power cable and the speaker
cables. You can also store other items such as your microphones here. Open the cover and remove the
items you need. Then close the cover again.
21