Transmission; Handshake; Print Settings; Print Output - OHAUS Adventurer Analytical AX224N Handbuch

EN-36
5.6.3
Set the data bits, stop bit, and parity.
5.6.4
Set the flow control method.

Print Settings

Enter this sub-menu to customize data transfer settings.
Print Settings sub-menu

Transmission

7 EVEN 1 = 7 data bits, even parity, stop bit 1
7 ODD 1 = 7 data bits, odd parity, stop bit 1
7 EVEN 2 = 7 data bits, even parity, stop bit 2
7 ODD 2 = 7 data bits, odd parity, stop bit 2
7 NONE 1 = 7 data bits, no parity, stop bit 1
8 NONE 1 = 8 data bits, no parity, stop bit 1
7 NONE 2 = 7 data bits, no parity, stop bit 2
8 NONE 2 = 8 data bits, no parity, stop bit 2

Handshake

NONE = no handshaking
XON-XOFF = XON/XOFF handshaking
HARDWARE = hardware handshaking

5.6.5 Print Output

Stable Weight Only
Set the printing criteria.
OFF
ON
Numeric Value Only
Set the printing criteria.
OFF
ON
Single Header Only
Set the printing criteria.
OFF
ON
Print Options
Set the printing criteria.
Printer
PC
= values are printed immediately, regardless of stability.
= values are printed only when the stability criteria are met.
= All Result and G/N/T data values are printed. See
section 7.2 for more information
= Only numeric data values are printed
= Headers will be printed for every print requirement
= Headers will be printed once a day
= Print data to a printer
= Print data to a PC
ADVENTURER BALANCES