Auto Print; Print Content; Feed; Format - OHAUS Adventurer Analytical AX224N Handbuch

ADVENTURER BALANCES
Save to USB
Set the status.
OFF = the data will not be saved to USB
ON = the data will be saved to USB

5.6.6 Auto Print

Set the automatic printing functionality.
OFF
ON STABILITY
2
INTERVAL
CONTINUOUS = printing occurs continuously.
1
When ON STABILITY is selected, set the conditions for printing.
LOAD
LOAD ZERO
2
When INTERVAL is selected, set the time interval using the numeric keypad.
Settings of 1 to 3600 seconds are available. Default is 0.

5.6.7 Print Content

Define the content of the printed data.
Selection
Set the status.
Header
Date & Time
Balance ID
Balance Name
User Name
Project Name
Application Name
Sample Name
Result
Gross
Net
Tare
Information
Signature Line

5.6.8 Feed

Set the paper feed.
1 LINE
4 LINE

5.6.9 Format

Set the printing format.
Single Line
Multiple Lines = prints on multiple lines.

5.6.10 Print Calibration Data

Set the printing criteria.
Off = disabled
On = enabled.
= disabled
1
= printing occurs each time the stability criteria are met.
= printing occurs at the defined time interval.
= Prints when the displayed load is stable.
= Prints when the displayed load and zero reading is stable.
Deselect All = all are set to OFF
Select All = all are set to ON
= move the paper up one line after printing.
= move the paper up four lines after printing.
= prints on a single line.
EN-37