Accessories - Thomashilfen Hercules XL Gebrauchsanweisung

Instructions for Use – Hercules XL
Changing the strap length of shoulder straps
Pull on the loose straps to shorten and tighten the straps. To lengthen the straps, press
the trigger of the strap tensioners and then pull the strap to the desired length. By
changing the adjustment range on the belt tensioner, you can adapt the belt even bet-
ter to the user.
Belt buckle
To open, press on the red recess of the cap. Then separate the two upper belt hold-
ers. To close the belt, insert the belt holders individually into the latch and press them
together until they click into place with an audible "click".
Headrest cushion
The headrest cushion is held in place by two hook and loop fasteners. These are
guided through the slot in the backrest cushion and the back plate and are attached to
the back. (fig. 17)

Accessories

Remark: The assembly / disassembly of the accessories is done with standard tools.
• Allen key size 3 / size 4 / size 5
• Open-ended spanner size 8 / size 10 / size 13
• Screw locking material (Loctite®)
• Hair dryer
Swivel function
The swivel function allows the carer to turn the unbuckled seat to the right or left to
make it easier to get in and out. On delivery, the direction of rotation is mounted on
the right-hand side of the vehicle, just like the red belt guide at the top for use on the
right-hand side of the vehicle.
To turn the Hercules XL, pull the red pull-catch (fig. 18) and turn the seat towards the
open vehicle door. When turning back, make sure that the pull-catch audibly clicks
into place.
38
2021-04