Accessories - Thomashilfen RECARO Monza Nova 2 Reha Gebrauchsanweisung

Instructions for Use – RECARO Monza Nova 2 Reha
Seat and back with integrated 11-position height-adjustable headrest
Infinitely variable neck support of the headrest with integrated air cushion in the headrest
Side impact protection
Fixed armrests
Crotch pad
Integrated loudspeakers in headrest for mp3 player connection
Removable covers

Accessories

Remarks: Installation information is found in the Instructions for Use, which are enclosed with the accessory. If the copy
of the Instructions for Use is missing, you can download one from www.thomashilfen.de. The assembly / disassembly of
the accessories is done with standard tools.
Adapter plate (Fig. 17)
The adapter plate is needed to use another accessory. It is attached at the front on the seat surface of the rehab car seat.
Swivel base with adapter (Fig. 18)
With the swivel feature the rehab car seat can be turned towards the vehicle's door. For caregivers transferring the user
and accessing the car seat's 5-point positioning harness is made easier. For the user it is easier to get in and out inde-
pendently. Other accessories can be attached to the adapter at the front of the rehab care seat at the same time.
Back stabiliser (Fig. 19)
Back stabilisers hold in place the movable back of the rehab car seat. When using the swivel function, they prevent the
back of the car seat from accidently folding back.
Seatfix adapter (Fig. 20)
ISOFIX can be used in the vehicle with the Seatfix adapter to increase the stability of the rehab car seat. Extra stability
is especially needed if the swivel feature (and / or tilt feature) is also being used. The Seatfix adapter also secures the car
seat in the vehicle when it is not being used.
Stabilising bow (Fig. 21)
The stabilising bow is attached to the back of the rehab car seat and pushed between the gap between the seat surface
and seatback of the vehicle's seat. It is suitable if ISOFIX can't be used. Extra stability is especially needed if the swivel
feature (and / or tilt feature) is also being used.
Stand (Fig. 22)
The stand helps to stabilise the rehab car seat. Extra stability is especially needed if the swivel feature (and / or tilt fea-
ture) is also being used.
Seat wedge, below (Fig. 23)
The seat wedge (below) is put on the vehicle's seat under the rehab car seat to tilt the car seat. Tilting the seat back is
good for children with little body tension and / or poor head control.
The seat wedge is positioned centrically below the car seat. The high edge is at the front to achieve an optimum rest
position of the child.
Please note: Function of the swivel base is considerably reduced if being used in combination with the seat wedge. We
therefore do not recommend using seat wedge and swivel base at the same time.
Fig. 24: Positioning seat on seat wedge / Fig. 25: Final position
22
2021-04