Thomashilfen Hercules XL Gebrauchsanweisung Seite 41

Instructions for Use – Hercules XL
Leg guides
The leg guides are screwed to the left and right from below in the drill holes provided
on the seat depth plate (2 screws each). (fig. 30)
They guide the thighs and give the user more support in the thigh area.
Footrest, foldable
The footrest is inserted from the front into the receptacle under the seat plate. (fig. 31)
Adjust the depth of the footrest to the seat in the vehicle. Screw the footrest to the
sides under the seat plate using the 2 set screws supplied (1 screw per side). (fig. 32)
With the red eccentric levers on both sides the desired angle can be adjusted. Make
sure that the eccentric levers point downwards after adjustment. (fig. 33)
Choose the height of the lower crossbar so that it supports the Hercules XL seat
securely in the vehicle's footwell. The height can be adjusted using the side screws.
(fig. 34)
If the footrest is not at the right height for the user, loosen the footrest set screws on
both sides. Adjust the height to suit the user and tighten the set screws again. (fig. 35)
Make sure that both Allen screws are on the footrest.
The folded up footplate is held by a magnet. This makes it easier to get in and out of
the seat.
Stand
The stand is inserted from the front into the receptacle under the seat plate. (fig. 31)
Adjust the depth of the stand to the seat in the vehicle. Screw the stand to the sides
under the seat plate using the 2 set screws (1 screw per side) supplied. (fig. 32)
With the red eccentric levers on both sides the desired angle can be adjusted. Make
sure that the eccentric levers point downwards after adjustment. (fig. 33)
Choose the height of the lower crossbar so that it supports the Hercules XL seat
securely in the vehicle's footwell. The height can be adjusted using the side screws.
(fig. 34)
41
2021-04