Troubleshooting - Bosch MUMS2-Serie Gebrauchsanleitung

Troubleshooting

11 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
working.
The swivel arm cannot
be opened or closed
because the tool is
jammed in the bowl.
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
Drive is not in the parked position.
Set the rotary switch to
1.
When the swivel arm is open, remove the tool and
2.
close the swivel arm.
Set the rotary switch to
3.
a The drive slowly moves until the correct parked po-
sition is reached.
Troubleshooting en
⁠ .
and hold it in this position.
37