Herunterladen Inhalt Inhalt Diese Seite drucken

Material Specifications; Cleaning, Maintenance, And Repair; Cleaning, Care Instructions, And Disinfection On A Daily Basis; Maintenance And Inspection By The Distributor / Maintenance Schedule - Thomashilfen EASyS Advantage Gebrauchsanweisung

Sitzeinheit
Vorschau ausblenden Andere Handbücher für EASyS Advantage:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Instructions for Use – EASyS Advantage seat unit

Material Specifications

Padding: Polyester – Trevira CS
The material used for the padding is "flame retardant" and was tested in accordance with DIN EN 1021-1 and DIN EN
1021-2.
The material and components underwent standard testing to determine the extent of their resistance to inflammation
and were assessed as being very unlikely to catch fire.
The 100% Trevira CS material is a high-quality, breathable material and tested positive for biocompatibility. (DIN EN
ISO 10993-5 and 10993-10 Trevira CS, black)

Cleaning, Maintenance, and Repair

Cleaning, Care Instructions, and Disinfection on a Daily Basis

Padding
The padding can be easily removed in a few simple steps and washed separately. The padding consists of a fabric cover
and sometimes fillers made of foam. Check if the padding has a zipper or a hook and latch fastener. If it does, open the
padding and remove the foam filler before washing the cover. Please also note the following care instructions.
We would like to point out that even high-quality materials can fade as a result of long and intense exposure to sunlight
or frequent washing.
When changing users, an "upholstery set for reuse" is offered by the manufacturer.
Hook and Loop Fasteners
To keep the hook and loop fasteners working well, clean them now and then with a brush. Always close or cover the
hook and loop fasteners before washing.
Plastic Parts
The plastic parts on the product can be cleaned and disinfected with standard soap (neutral soap).
Metal Parts
The metal parts on the product can be cleaned and disinfected with standard soap (neutral soap).
Disinfection
Clean the padding, plastic parts, and metal parts before disinfecting.
Damp wipe all the plastic and metal parts on the product with disinfectant. Only water-based products should be used.
When disinfecting note the directions from the manufacturer in question.
The padding and the covers have to be disinfected before reusing. To do so use the right detergent in keeping with the
guidelines of the Association of Applied Hygiene VAH (Verbund für Angewandte Hygiene e.V.) or use an "upholstery set
for reuse" offered by the manufacturer.
Maintenance and inspection by the distributor
Preparation
A copy of the Instructions for Use has to be enclosed with the product. If one is not available, request a copy from the
distributor. Familiarise yourself with how the product works. If you are not familiar with the product, read the Instruc-
tions for Use before testing it. Clean the product before starting to test is. Please note the care instructions in the Instruc-
tions for Use and product-specific test instructions. If you have further questions, please contact the staff member you
dealt with or Thomashilfen directly.
Service and repairs to the product should only be done by qualified staff. It is the user's responsibility to ensure that the
prescribed inspections / maintenance are done regularly and in a timely fashion. If damage is apparent, the user has to
actively inform and have the damage fixed immediately by qualified staff.
29
2021-04

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis