Connecting The Water Supply - Stihl RE 271 Gebrauchsanleitung

Disconnecting the high-pressure hose
4
Unroll the high-pressure hose (4)
N
Pull out the spring clip (3) and pull
N
the high-pressure hose (4) out of
the connector
Connecting the high-pressure hose
Push the high-pressure hose (4)
N
onto the connector of the hose reel
Push the spring clip (3) down into
N
the connector
Connect the high-pressure to the
spray gun
2
3
1
Push the high-pressure hose (1)
N
onto the connector (2)
Attach union nut (3) and screw it on
N
and tighten by hand
RE 271, RE 271 PLUS, RE 281, RE 281 PLUS
Removal
3
Push the coupling (4) in the
N
direction of the arrow and hold it
Loosen the union nut (3) and
N
unscrew it from the connector in the
direction of the arrow
High-pressure hose extension
As a rule, always use only one high-
pressure hose extension – see "Special
accessories"

Connecting the water supply

Briefly rinse out the water hose before
connecting it to the machine to prevent
4
sand and other particles from entering
the machine.
3
Connect hose (3/4" diameter, length
N
at least 10 m to absorb pressure
surges)
Push the coupling (1) on to the hose
N
connector (2)
Turn on water supply
N
In suction operation, the machine can
also be connected to rivers, lakes,
cisterns and tanks, etc. – see
"Connecting to a pressureless water
supply".
English
2
1
35