Settings; Aligning The Stove; Adjusting The Door - Austroflamm Clou Compact 2.0 Betriebsanleitung

Operating manual Clou Compact 2.0
10

Settings

10.1 Aligning the stove

Fig. 37: Aligning the stove

10.2 Adjusting the door

Fig. 38: Undoing the screws
EN
1) First the cover and the side cladding must be de-
tached.
ð Proceed , as described in the section Removing
the side cladding [}on page 76].
2) There are two screw on the back of the stove. These
can be used to align the stove.
ð When doing so take note of the type of floor.
Should the floor under the stove be made of tiles,
wood, laminate etc., the floor can be damaged.
1) Only the left side rear cladding needs to be removed
to adjust the door. Proceed as described in the sec-
tion Removing the side cladding.
2) Opening the door
3) Undo the screws from the top front trim.
10 | Settings
87