Fuel; Electrical Connection - Austroflamm Mo Duo Benutzerhandbuch

EN
2.3.

Fuel

Pellets
We recommend using ENplus-A1 approved pellets.
NOTE!: Using inferior quality pellets
or other material will impair the functioning of your pellet
stove and invalidate the warranty.
When storing the pellets, it is essential that they are kept in a cool, dry place and free from contamination.
Damp pellets impair combustion and clog the screw conveyor.
Firewood
Only use untreated, dry wood.
The wood moisture content should be < 15 %.
Basically, the amount of firewood fed determines the heat output. If signifi-
cantly too much wood is fed, this can lead to overheating and damage to the stove. Damp wood causes poor
combustion and exhaust gas values, as well as soiling of the viewing glass and the flue gas ducts.
2.4.

Electrical connection

Your stove is designed for connection to a 230 V -50 Hz mains supply.
The connection cable is included in the accessory pack.
The mains socket is located on the back of the appliance and is protected
by a T2.5 A glass-tube fuse.
The power consumption of your appliance is indicated on the type plate.
3
CLOU DUO, MO DUO
english
www.austroflamm.com 3