Handling And Operation - Silvercrest SHD 7.4 A1 Bedienungsanleitung

Handling and operation

ATTENTION! PROPERTY DAMAGE!
► The suction opening
not be blocked. A blocked suction opening
overheating and damage to the appliance.
► Do not use the appliance to vacuum liquids. They can cause a
short-circuit and damage the appliance beyond repair.
NOTE
► Always make sure that the dust filter
before you use the appliance (see section Cleaning/changing
the dust filter).
1. Hold the appliance by the handle
appliance (see Fig. 4).
2. If required, insert the 2-in-1 suction nozzle
2
opening (see section 2-in-1 suction nozzle).
3. Press the On/Off switch
The charge indicator lamp
4. Press the On/Off switch
use. The charge indicator lamp
5. Push the cap
6. For storage, stand the appliance on the cap
be used as a stand (see Fig. 5).
│ GB │ IE
■ 16
2
must be kept free at all times and may
7
6
7
1
back onto the appliance (see Fig. 4).
2
5
is properly inserted
9
and pull the cap
w
into the suction
to switch on the appliance.
lights up blue.
to switch off the appliance after
6
turns off.
1
can result in
1
off the
, which can also
SHD 7.4 A1