Accessories - Hach PAH500 Bedienungsanleitung

Event
RESET CALIBRATE
CONC TOO HIGH

6.5 Accessories

Description
Cleaning swabs
Digital extension cable, 1 m (3.2 ft)
Digital extension cable, 7.7 m (25 ft)
Digital extension cable, 15 m (50 ft)
Digital extension cable, 31 m (100 ft)
Mounting Hardware Kit, includes:
Mounting brackets and hardware for one sensor and digital gateway
Calibration Kit, includes:
50 ppb and 25 ppb Phenanthrene ampules, deionized water, cleaning
swabs, drain valve, plug, ampule breaker, vials and disposable
pipettes
Plug, 1/4-inch NPT
Drain valve
Disposable pipettes, 5.0 mL
Detergent, Alconox
Detergent, Liqui-Nox
Sulfuric acid, 5.25 N
Isopropyl alcohol
Phenanthrene check, 25 ppb, includes:
phenanthrene ampules (2), ampule breaker and empty vial
Phenanthrene calibration point, 50 ppb, includes:
phenanthrene ampules (2), ampule breaker and empty vial
Table 4 Event list (continued)
Description
The calibration slope and offset were set to the factory
defaults.
The measured PAH is higher than the measurement
range of the sensor.
Quantity Item no.
50 9770700
1 6122400
1 5796000
1 5796100
1 5796200
1 LXZ541.99.0001H
1 LZC541
1 6845000
1 6166300
20 2749320
1.8 kg 2088000
946 mL (1 qt) 2088153
100 mL MDB 244932
100 mL 1227642
1 2563899
1 2563901
English 25