Care And Maintenance - Assa Abloy ANYKEY - Türcode Bedienungsanleitung

Begin with the battery on the back right.
First put the negative terminal of the battery on the corresponding
spring contact in the seating.
Beware
The system may not function if the spring contacts are bent. Take
care when inserting the batteries that you do not damage or
bend the spring contacts.
If you have damaged or bent a spring contact, do not operate the
fitting until it has had specialist repairs.
Press the battery against the spring, pushing the positive terminal of
the battery from the front diagonally on to the contact.
Follow the same procedure with the back left battery.
Now guide the band in front of the inserted batteries to the other side
and insert the two front batteries.
The door fitting is now operational again.
Take note of the guidelines for disposal in the following section.
D00471
04

Care and maintenance

Page 57