Operating Instructions; Function - Assa Abloy ANYKEY - Türcode Bedienungsanleitung

Security lock fitting with integrated access control
4

Operating instructions

4 . 1 F u n c t i o n
The external handle is activated for 2 seconds when you enter your valid User-Code. In this time you can open the
door.
The external handle remains deactivated if you enter an invalid code. You cannot open the door.
A right code is also identified between any number sequences. So you can hide the code. This will increase the
safety level, if you had been spied while entering the code. Furthermore results a higher tolerance against faulty
inputs e.g. typing error.
Example:
Your code is 5244. If you now type in 12852441, you can open the door, as soon as the correct code between the
number sequence is identified.
There are two release modes:
Temporary release:
The external door handle is activated for about 2 seconds. During this time the door can be opened. After that
the external door handle is deactivated again.
Permanent release:
The external door handle remains permanently activated until the permanent locking is switched off again. The
storage locations 1 to 9 do have apart from temporary release also the authorisation to switch on/off the
permanent release as standard.
Notice
The authorisation to switch on/off the permanent release must be given as an extra to user numbers 10 to
39. See chapter "Create a user 2".
Page 50 D00471
04