Assa Abloy ANYKEY - Türcode Bedienungsanleitung Seite 44

Security lock fitting with integrated access control
2.3.2 Change Master-Code
Press keys
The new Master-Code is now active. Use this new Master-Code for all further programming procedures.
Notice
If there is another flash sequence shown as described, the progamming failed. The old Master-Code
remains active. Get to know the described procedure and program the Master-Code another time.
2.3.3 Deleting the Master-Code
See chapter „Deleting all programming"
Page 44
Signalling Function
Start the programming
Enter Master-Code and acknowledge
(3 to 8 digits).
Press 0 and acknowledge (storage location).
Enter new Master-Code and acknowledge
(3 to 8 digits).
Continue programming
Enter Master-Code and acknowledge
(3 to 8 digits).
Press 0 and acknowledge (storage location).
.
.
.
Enter new Master-Code and acknowledge
(3 to 8 digits).
2 x
The programming was successful.
D00471
04