Maintenance, Warranty, Disposal; Maintenance - Assa Abloy eCLIQ Installations- Und Montageanleitungen

Maintenance, warranty, disposal

Maintenance

I
Impor tant!
Do not apply lubricants in the eCLIQ locking cylinder: The eCLIQ elec-
tronic locking cylinder may not be greased or filled with other substances.
Replacing bat teries „Pic. 8: Battery replacement", page 65
I
Impor tant!
Replace the battery within 30s: Stored data is kept for 30s. A new
battery must be inserted within this time span.
We recommend replacing the battery after 30,000 openings or within 3
years. The battery warning must be observed.
1 Rotate the battery cover on the key grip 40° anti-clockwise.
2 Note the alignment of the battery cover based on the mark.
3 Remove the cover.
4 Pay attention to the correct polarity of the battery and insert a new
type CR2032 battery.
5 Fit the battery cover in place again with the alignment in which it was
removed.
6 Rotate the battery cover on the key grip 40° clockwise.
Maintenance, warranty, disposal
EN
27