Introduction; Security - From The Very First Minute; Use In Compliance With Regulations; Foreseeable Errors In Use - Assa Abloy ANYKEY - Türcode Bedienungsanleitung

1

Introduction

1 . 1 S e c u r i t y - f r o m t h e v e r y f i r s t m i n u t e !
You essentially have to programm the Master-Code, to prevent opening the fitting with the code 0. (see chapter
„Programming guide").
1 . 2 U s e i n c o m p l i a n c e w i t h r e g u l a t i o n s
The security fitting with integrated access control is a battery-operated access control system.
It is integrated as a stand-alone device into a fitting system.
Identification is carried out by inputs of codes.
Opening the door from the outside is only possible for authorised users.
Opening the door from the inside is possible at any time for all users.
Other uses are not permissible.
Unauthorised changes or rebuilding not described in the operating instructions are not permissible.
1.2.1

Foreseeable errors in use

Make sure that the door always shuts. Do not use wedges or door stops or other aids that stop the door locking.
1 . 3 O p e r a t i o n s a n d g e n e r a l t e r m s i n t h e s e i n s t r u c t i o n s
, ,
,
Activate:
The external door handle is released for operating. You can open the door from the inside and also from the
outside.
Deactivate:
The external door handle is not operational. You can only open the door from the inside.
D00471
04
... Press keys.
Secret Code 3 to 8 digits.
Notice:
Here you can write down your desired code before programming. This
makes the programming procedure easier.
Display lights up or flashes.
Operate external door handle.
Important:
You have to make the next input within 5 seconds. If you do not continue
within these 5 seconds, the programming will be cancelled. The old
Master-Code persists. You have to restart with programming the Master-
Code.
Introduction
Page 37