Assa Abloy ANYKEY - Türcode Bedienungsanleitung Seite 46

Security lock fitting with integrated access control
2.4.2 Create a user 2 (storage location 10 to 39 with permanent release authorisation)
Press keys
The programmed User-Code can now be used.
Notice
If there is another flash sequence shown as described, the progamming failed. The User-Code cannot be
used. Get to know the described procedure and program the User-Code another time.
2.4.3 Unlocking door permanent
How to unlock the door permanent and lock again, see chapter „Operation".
Page 46
Signalling Function
Start the programming
Enter Master-Code and acknowledge
(3 to 8 digits).
Enter storage location (10 to 39) and acknowledge
(storage location).
Assign permanent release
Enter new User-Code and acknowledge
(3 to 8 digits).
2 x
The programming was successful.
D00471
04