Programming Instructions; Basics For The Programming - Assa Abloy ANYKEY - Türcode Bedienungsanleitung

Security lock fitting with integrated access control
2 P r o g ram m i n g i n s t r u c ti on s
2 . 1 B a s i c s f o r t h e p r o g r a m m i n g
First get to know the relevant description of the programming sequence.
Do not begin with the programming until you have understood the sequence.
Then follow the programming or operating sequence into the grey highlighted fields.
Notice
Programming or operating sequences will be automatically stopped if the time is exceeded.
Sequential steps must be carried out within 15 seconds.
So that you always have an overview it is best to make a table before programming the user data.
Beware
Access of unauthorised persons is possible! There is a security leak!
Notice that the table contain access data.
Keep the table at a safe place.
Example:
Storage
location
0
Storage
location
1
...
9
10
...
39
You will find a blank table in the appendix as a reproducible template.
Page 40
Name Master-Code
Smith, Peter
(3 to 8 digits)
Name User-Code
Smith, Peter
(3 to 8 digits)
Kromer, Martin
(3 to 8 digits)
Palmer, Justin
(3 to 8 digits)
O´Connor, Tim
(3 to 8 digits)
Authorisation
Programming and
deleting
Authorisation
Temporary and
permanent release
Temporary and
permanent release
Temporary release
(Permanent release
optional)
Temporary release
(Permanent release
optional)
D00471
04