General Information; Proper Use - Scheppach PL75 Originalbetriebsanleitung

1. Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We wish you much joy and success in working with your
new appliance.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operating
instructions contain important information on how to
operate the machine safely, professionally and eco-
nomically, how to avoid danger, costly repairs, reduce
downtimes and how to increase reliability and service
life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regulati-
ons that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruc-
tion manual each time before operating the machi-
ne and carefully follow its information. The machine
can only be operated by persons who were instructed
concerning the operation of the machine and who are
informed about the associated dangers. The minimum
age requirement must be complied with.
14 GB
2. Device description Fig.1a, 1b
1. Handle/hand grip
2. Front handle
3. Plunge-cut trigger
4. On/off switch
5. Base plate
6. Adjustment screw for depth of cut
7. Scale for depth of cut
8. Mitre adjustment screw
9. Mitre square
10. 90-degree adjustment screw
11. Saw blade
12. Suction nozzle
13. Adjustment screw for guide rail
14. Shaft locking mechanism
15. Splitter guard

3. General information

• After unpacking, check all parts for possible trans-
portation damages. In the event of complaints, in-
form the supplier immediately. Any complaints made
after this time will not be accepted.
• The shipment is to be checked for completeness
upon receipt.
• Read through the manual carefully in order to make
yourself familiar in dealing with the device before
using it for the first time.
• Only use original equipment regarding accessories,
as well as consumable items and spare parts. Spare
parts can be obtained from your specialized dealer.
When ordering, please specify our part numbers, as
well as type and construction year of the device.

4. Proper use

CE tested machines meet all valid EC machine gui-
delines as well as all relevent guidelines for each
machine.
• The machine must only be used in technically per-
fect con dition in accordance with its designated use
and the in structions set out in the operating manual,
and only by safety-conscious persons who are fully
aware of the risks involved in oerating the machine.
Any functional dis orders, especially those affecting
the safety of the machine, sholud terefore be rectified
immediately.
• Any other use exceeds authorization. The manufactu-
rer is not responsible for any damages resulting from
un authorized use; risk is the sole responsibility of the
operator.
• The safety, work and maintenance instructions of the
manufacturer as well as the technical data given in
the calibrations and dimensions must be adhered to.
• Relevant accident prevention regulations and other,
gene rally recognized safety-technical rules must also
be adhered to.