Stop light
To replace the rear stop and parking light bulbs, unscrew
the two screws (1) that secure the cover (2). The cover (2)
has two retaining pins on the inner face that hold the tail
light lens (3) in place. Remove the cover (2) from its seat
and remove the tail light lens (3). The bulb is of the
bayonet-type: press and twist counter-clockwise to
E
remove. Change the bulb and refit by pressing and turning
clockwise until it locates into its seat with an audible click.
Refit any parts you have removed.
Number plate light
To expose the number plate light bulb, unscrew the
two retaining screws (4) securing the cover (5).
Extract the bulb and replace.
72
3
2
5
3
1
4
fig. 72
fig. 73