Ducati 999R 2005 Anleitung- Und Instandhaltungsheft Seite 110

Lap time recording
This function lets you record lap time and displays top
speed and engine rpm during that lap.
Select TRIP indication in the display (4, fig. 10). Press
the engine start button (5, fig. 11) while riding to start the
on-board chronometer. When button (5) is pressed again,
the chronometer will stop and at the same time will
start the on-board chronometer to read the 2nd time.
It is possible to save up to a maximum of 19 laps; if you
save a higher number of laps, the first ones saved will
be lost (the "last" 19 laps are saved in the memory).
Note
In the LAP mode, the engine may not be started
using the starter button (5).
Saved lap time display function
After measuring lap times, up to 19 times may be
retrieved and displayed on the LCD. After switching the
bike off, press button (2, fig.10) and turn the key from OFF
to ON in order to access the function.
Once you have accessed the function, press button (1) to
scroll through the recorded times. The instrument panel
provides the following information:
- Lap number (6);
- Top engine rpm (7, fig. 10) during selected lap;
- Lap time (4, fig. 10);
- Top speed (8, fig. 10) during that lap.
1
8
4
7
2
6
fig. 10
5
fig. 11
17
E