Changing The Number Plate And Brake Light Bulbs - Ducati MULTISTRADA 1000DS S 2006 Anleitung- Und Instandhaltungsheft

Changing the number plate and brake light bulbs

Unscrew the two screws (1) securing the rear light
mounting to the number plate holder on the inside of the
holder.
Unscrew the screw (2) and pull the rear light mounting off
a short way (fig. 67).
Disconnect the connector (A) of the rear wiring harness
E
and remove the rear light mounting (fig. 68).
76
1
A
2
fig. 67
fig. 68