Braking; Stopping The Motorcycle - Ducati 999R 2005 Anleitung- Und Instandhaltungsheft

Braking

Slow down in time, shift down to engine-brake first and
then brake by applying both brakes. Pull the clutch lever
before stopping the motorcycle, to avoid sudden engine
stop.
Warning
Use both brake lever and pedal for effective braking.
Using only one of the brakes will give you less braking
power.
Never use brake controls harshly or violently or you may
lock the wheels and lose control of the motorcycle.
When riding in the rain or on slippery surfaces, braking
will become less effective. Always use the brakes very
gently and carefully when riding under these conditions.
Any sudden manoeuvres may lead to loss of control.
When tackling long, high-gradient downhill road tracts,
shift down gears to use engine braking. Apply one brake
at a time and use brakes sparingly. Keeping the brakes
applied all the time would cause the friction material
to overheat and reduce braking power dangerously.
Underinflated or overinflated tyres reduce braking
efficiency and may affect safe riding and motorcycle
good handling while turning.

Stopping the motorcycle

If you let go of the throttle twistgrip, the motorcycle will
slow down gradually and smoothly. Then, shift down
releasing the clutch, and finally change from first to
neutral. Apply brakes and you will bring the motorcycle
to a complete stop. To switch the engine off, simply
turn the key to OFF (page 24).
E
51