Disposal; Troubleshooting - Lux Tools 115315 Originalbetriebsanleitung

115315_Schredder_Benzin.book Seite 45 Dienstag, 31. Mai 2016 10:54 10
Figure 16 – Page 7
– Remove spark plug connector (33) and the spark
plug.
– Allow a teaspoon of fresh motor oil to trickle into
the combustion chamber. Replace the spark
plug, but do not affix the spark plug
connector (33).
Figure 17 – Page 7
– Pull the starter cord (10) several times to distrib-
ute the oil in the motor.
– Pull the starter cord (10) out slowly until you feel
resistance. Do not pull any further.
Figure 16 – Page 7
– Affix the spark plug (33) connector firmly to the
spark plug.
Transportation
– Secure the device from shifting.
– When dispatching, try to use the original pack-
aging, if possible.

Disposal

Disposing of the device
Risk to the environment, fire hazard!
Avoid damages caused by escaping fuel:
Empty the tank before disposal.
This device may not be disposed of
with the household waste! Contact
your community authorities for infor-
mation regarding the correct disposal
of the device.
By disposing of the product correctly
you are ensuring that it will be recycled or processed
for reuse. This helps to prevent hazardous material
from damaging the environment.
Disposing of the packaging
The packaging is made of cardboard and separately
labelled foil which is also recyclable.
– Take these materials to a recycling centre.
Disposing of oil and fuel
– Oil and fuel must be disposed of properly. DO
not dispose of with the household waste.

Troubleshooting

What to do when something does't work ...
DANGER! Risk of injury! Unprofessional
repairs may mean that your device will no
longer operate safely. This endangers you
and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the
vendor. You will save yourself a lot of trouble and
possibly money too.
GB
45