Package Contents; Description (Fig. A); Electrical Safety - DeWalt DC222 Bedienungsanleitung

E N G L I S H
Do not expose to water
Have defective cords replaced
immediately
Charge only between 4 °C and 40 °C
See technical data for charging time
Always wear safety glasses when
plugging in the charger.

Package contents

The package contains:
1 Cordless rotary hammer drill
1 Side handle
1 Depth adjustment rod
1 Charger (K-models only)
2 Battery packs (K-models only)
1 Kitbox (K-models only)
1 Keyless chuck (DC224)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your cordless rotary hammer drill DC222 has been
designed for professional drilling, hammer drilling
and screwdriving applications.
Your cordless rotary hammer drill DC223/DC224
has been designed for professional drilling, hammer
drilling and screwdriving applications as well as for
light chipping.
1 Variable speed switch
2 Forward/reverse slider
3 Mode selector
4 Safety lock
5 Tool holder
6 Locking collar
7 Dust cover
8 Depth adjustment rod
28
9 Side handle
10 Release buttons
11 Battery pack
Charger
Your DE0246 charger accepts D
and NiMH battery packs.
11 Battery pack
12 Charger
13 Charging indicator (red)
Overload clutch
In case of jamming of a drill bit, the drive to the drill
spindle is interrupted. Because of the resulting
forces, always hold the tool with both hands and
take a firm stance.
Brake mechanism
When the variable speed switch is released, the
spindle will stop rotating instantly.
Active vibration control
The active vibration control neutralises rebound
vibration from the hammer mechanism. Lowering
hand and arm vibration, it allows more comfortable
use for longer periods of time and extends the life of
the unit.
In operation, a spring loaded mechanism
counterbalances the vibration forces. This can be
sensed by the cushioning effect when pressure is
applied to the tool. Make sure the spring is engaged
but not too firmly. The mechanism should be
allowed to ‚float'.

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double
E
insulated in accordance with EN 60745.
WALT 24 V NiCd
E