Retaining Plate; Connection Adapter; High Pressure Pump - Bosch CRI 848H Originalbetriebsanleitung

en 60 | CRI/CRIN 848H | Product description
3.6.4

Retaining plate

The retaining plate is inserted in the guide of the injec-
tor holder and provides support when clamping the
injector in the injector holder. There are various types
of retaining plate. These are only intended for clamping
commercial vehicle injectors.
i
The appropriate retaining plate for the injector con-
cerned can be found in the system software EPS 945
in the "Component selection" window under "Gen-
eral values".
Fig. 6: Retaining plate
3.6.5

Connection adapter

The connection adapter supplies test oil to commercial
vehicle injectors with internal connections and dis-
charges the return quantity to the measuring device by
way of the connection (Fig. 7, item 1). There are differ-
ent types of connection adapter.
8
7
1
6
4
5
Fig. 7: Connection adapter
1 Return quantity connection
2 Connection piece for high-pressure hose 1 681 032 116
3 Union nut 1 683 345 079
1)
4 Inlet connector 1 683 386 188
5 Guide
6 Resting surface
7 Injector mounting hole
8 Labelling area
Included in parts set 1 687 016 135
1)
|
1 689 989 087 2018-07-24
2
3
1)
1)
3.6.6

High pressure pump

The high pressure pump supplies the injectors with test
oil during the test.
5
4
3
2
Fig. 8: High pressure pump with clamping bracket
1 High pressure pump
2 Sliding block with clamping screws
3 Clamping bracket
4 Drive flange
5 Return connection
6 Inlet connection
7 High-pressure connection
8 ZME connection
6 7
8
Robert Bosch GmbH
1