What To Do If; Installation; Technical Data - Electrolux ekk603504 Benutzerinformation

34 electrolux

WHAT TO DO IF...

Problem
There is no spark when lighting
the gas
There is no spark when lighting
the gas
There is no spark when lighting
the gas
The flame is blow out immedi-
ately after ignition
The gas ring burns unevenly
The appliance does not operate The fuse in the fuse box is re-
The oven does not heat up
The oven does not heat up
The oven lamp does not operate The oven lamp is defective
The display shows "12.00" and
"LED"
Steam and condensation settle
on the food and in the oven cav-
ity
If you can not find a solution to the prob-
lem, refer to your dealer or the Service
Force Centre.
Warning! Let a qualified electrician or
competent person do repairs to the
appliance.
Important! If you do not operate the
appliance correctly, the visit from the
Service Force Centre or dealer will not be
free of charge, even during the warranty
period.
If you can not find a solution to the prob-
lem, speak to your dealer or the Service
Force Centre.

INSTALLATION

Important! First read "Safety information"
chapter carefully.
Possible cause
There is no electrical supply
There is no electrical supply
Burner cap and crown are
placed uneven
Thermocouple is not heated suf-
ficient
Burner crown is blocked with
food residues
leased
The oven is not switched on
The necessary settings are not
set
A power cut
You left the dish in the oven for
too long
These data are necessary to help you
quickly and correctly. These data are
available on the rating plate (refer to
"Product description")
• Model description ............
• Product number (PNC) ............
• Serial number (S.N.) ............

Technical Data

Appliance class 2, sub class 1 and class 1.
Make sure that the unit is con-
nected and the electrical supply
is switched on.
Examine the house electrical in-
stallation fuse.
Make sure that the burner cap
and crown are in correct posi-
tions.
After lightning the flame, keep
the knob pushed for approxi-
mately 5 seconds.
Make sure that the injector is
not blocked and the burner
crown is clear of food particles.
Control the fuse. If the fuse is re-
leased more than one time, re-
fer to a qualified electrician.
Switch on the oven
Control the settings
Replace the oven lamp
Reset the clock
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
Hints for appliances with metal
fronts:
If you open the door during or immedi-
ately after the baking or roasting proce-
dure, steam can show on the glass.
Remedy