Electrolux ekk603504 Benutzerinformation Seite 35

Dimensions
Height
Width
Depth
Oven capacity
Gas Category
Gas Supply
Gas burners
NORMAL
POWER
BURNER
kW
Auxiliary 1,0
burner
Semi-rap- 2,0
id burner
Rapid 3,0 (nat.
burner gas)
2,8 (LPG)
Gas burners G20 13 mbar - only Russia
BURNER
Auxiliary burner
Semi-rapid burner
Rapid burner
Gas Connection
Choose fixed connections or use a flexible
pipe in stainless steel in compliance with
the regulation in force. If you use flexible met-
allic pipes, be careful they do not come in
touch with mobile parts or they are not
squeezed.
Flexible nonmetal pipes connection
If it is possible to easily control the connec-
tion in its full area, you can use a flexible
pipe. The flexible pipe must be tightly attach-
ed by clamps.
Installation: use the rubber pipe holder. Al-
ways engage the gasket. Then continue
850 mm
600 mm
600 mm
53 l
II2H3B/P
G20(2H) 20 mbar
RE-
DUCED
NATURAL GAS
POWER
G20 (2H) - 20 mbar
inj. 1/100
kW
mm
0,33 70
0,45 96
0,75 119
NORMAL REDUCED
POWER
kW
0,9
1,4
1,9
By-pass diameters
Burner
Auxiliary
Semi-rapid
Rapid
NORMAL POWER
(Butane/Propane) G30/31-30
inj. 1/100
m³/h
0,095
0,190
0,286
POWER
kW inj. 1/100 mm
0,33
0,45
0,75
with the gas connection. The flexible pipe is
prepared for apply when:
– it can not get hot more than room temper-
ature, higher than 30°C;
– it is no longer than 1500 mm;
– it shows no throttles;
– it is not subject to traction or torsion;
– it does not get in touch with cutting
edges or corners;
– it can be easily examined in order to
check its condition.
The control of preservation of the flexible
pipe consists in checking that:
– it does not show cracks, cuts, marks of
burnings on the two ends and on its full
length;
electrolux 35
Ø By-pass in 1/100
mm.
28
32
42
LPG
mbar
g/h
mm
G30
50 72
71 145
86 204
NORMAL POWER
NATURAL GAS
G20 13 mbar
m³/h
80 0,095
105 0,148
120 0,201
G31
71
143
200