Removing The Drawer; What To Do If; Possible Cause - Electrolux EKI6450AO Benutzerinformation

Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or
deactivate the circuit breaker.
Put a cloth on the bottom of the
oven to prevent damage to the
oven light and glass cover.
Replacing the oven lamp
1. You can find the lamp glass cover at
the back of the cavity.
Turn the lamp glass cover counter-
clockwise to remove it.
2. Clean the glass cover.
3.
Replace the oven lamp with an appli-
cable 300 °C heat-resistant oven
lamp.
Use the same oven lamp type.
4. Install the glass cover.

11.5 Removing the drawer

The drawer below the oven can be re-
moved for cleaning.
1. Pull the drawer out until it stops.

12. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The appliance does not
operate
1
Problem
2.
Inserting the drawer
1.
2.
2

Possible cause

The fuse in the fuse box
is released
Lift the drawer at a small angle and
remove it from the drawer support
rails.
Set the drawer on the support rails.
Make sure that the catches engage
correctly into the rails.
Lower the drawer until it is horizontal
and push it in.
WARNING!
When the oven is in use, heat can
build up in the drawer. Do not
keep flammable things in there
(e.g. cleaning materials, plastic
bags, oven gloves, paper, clean-
ing sprays, etc.).
Remedy
Control the fuse. If the
fuse is released more
than one time, refer to a
qualified electrician.
ENGLISH 31