Whirring Noise; Dismantling And Demolishing The Machine; Inconveniences And Their Remedies - Gastrodomus SPI 80 Bedienungs- Und Wartungshandbuch

The whirring noise emitted by the machine has been measured on an identical sample
machine in compliance with standard DIN 45635. A constant value not exceeding 70 dB(A)
was measured as stated in the manufacturer's test report.

9. DISMANTLING AND DEMOLISHING THE MACHINE

If machine needs to be dismantled and/or demolished, its components do not entail a degree
of danger that requires any particular precaution.
Remember, however, that to facilitate material recycling operations, it is a good rule to remo-
ve electrical system components from the machine.
INFORMATIVE REPORT TO THE CUSTOMERS
According to the art.13 of Decree Legislative 25 July 2005, n.151 "Performance
Directives 2002/95/CE, 2002/96/CE and 2003/108/CE, relative to the reduction of the use
of dangerous substances in the electronic and electrical equipment, let alone to dispos-
al of the refusals".
EN 50419
The symbol of the crossed bin brought back on the equipment or its packing indicates that the product at
the end of its own life cycle must be collected separately from the other refusals.
The differentiated collection of the present equipment at the end of its life cycle is organized and is man-
aged from the producer. The customer who want to unravel itself the present equipment will have there-
fore to contact the producer and follow the system that he has adopted in order to concur the separate
collection of the equipment at the end of its life cycle.
The adapted differentiated collection for the successive start of the cast-off equipment to the recycling, to
the treatment and to the compatible with environment disposal contributes to avoid possible negative
effects on the atmosphere and the health and favours the re-employment and/or the recycling of the mate-
rials of which the equipment is made.
Illicit disposal of the product by the holder involves the application of the previewed administrative
endorsements from the enforced norm.

10. INCONVENIENCES AND THEIR REMEDIES

INCONVENIENCES
1) Machine operation failure

8. WHIRRING NOISE

CAUSES
• disconnected plug
• plug leads not
correctly connected
• trip switch adjusted
for insufficient values
• unsuitable trip switch
• board fuses blown out
• timer not set
23
REMEDIES
• connect plug
• check lead
connections
• adjust trip switch
accordingly
• replace trip switch
• replace blown fuse
• set timer to required time