Package Contents; Preparation For Use; Installation Of The Link Module - NSK Wireless Link Tool Link Module LMP2 Bedienungsanleitung

Package Contents

3
Connector socket
No. Part name
Link box
Link cable
4
Connector
Button
Quantity
1
1

Preparation for Use

4
4–1 Installation of the Link Module
Insert the connector of the link cable
1
Lock nut
into the connector socket of the link
box.
Foot control plug
• Install or remove the Link Module only when the power of the VarioSurg 3 is OFF.
• Avoid unnecessary removal of the link cable. Poor contact of the connector can cause
malfunction.
Insert the foot control plug of the
2
link cable into the foot control cord
connector socket of the VarioSurg 3 and
tighten the lock nut firmly.
CAUTION